Hardknock Product Overview: Resolve FullBrim Helmets And Accessories
Header image: Hardknock
Quick Answer
Hardknock's core product is the Resolve FullBrim, an ANSI/ISEA Z89.1 Type II safety helmet with a full brim, built-in accessory rails, and a 4-point chin strap. It comes in four versions: vented (Class C), non-vented (Class E), a USACE configuration, and a vented model with a mining bracket. A rail-mounted accessory system adds face shields, a 12-cal arc flash shield, earmuffs, lights, and a sun shield, so one helmet can be set up for many different jobs.
The Hardknock Resolve FullBrim Lineup
| Model | Part number | Venting | Class | Included | Best for |
|---|---|---|---|---|---|
| Resolve FullBrim Vented | 100-0 | Vented | C | Accessory rails, chin strap | Hot weather, general construction away from electrical hazards |
| Resolve FullBrim Non-Vented | 105-0 | Non-vented | E | Accessory rails, chin strap, lamp bracket | Work near electrical hazards, utilities, night work |
| Resolve FullBrim Non-Vented USACE | 105-0-100-USACE | Non-vented | E | Accessory rails, chin strap | U.S. Army Corps of Engineers projects |
| Resolve FullBrim Vented with Mining Bracket | 100-3 | Vented | C | Accessory rails, chin strap, lamp bracket | Tunnels, mining, and low-light work with a cap lamp |
All four are Type II helmets, tested for impacts to the top and sides of the head. Class ratings are from the product listings. Class E helmets are tested for electrical protection up to 20,000 volts. Class C helmets offer no electrical protection. See helmet classes explained.
What Sets The Resolve Apart
- Full brim with Type II protection. Many Type II helmets use a climbing-style or short-brim shell. The Resolve keeps the full brim many crews prefer for sun and rain while adding side impact protection.
- Chin strap included. Every Resolve ships with a 4-point chin strap, which keeps the helmet on in a fall or a swing. Replacement straps come with a magnetic Fidlock buckle or a standard non-magnetic buckle.
- Accessory rails. Rails on the shell carry visor brackets, lights, clips, and earmuffs without drilling or adapters.
- A USACE-configured model. A dedicated version for crews and subcontractors on U.S. Army Corps of Engineers work.
The Hardknock Accessory System
Face And Eye Protection
The rail-mounted visor bracket takes interchangeable visors: clear high-heat polycarbonate, shade 3 green tinted, and steel mesh for brush and forestry work. Hardknock also offers an anti-fog clear full face shield. A face shield is secondary protection, so wear safety glasses underneath.
Arc Flash Protection
For electrical work, the ARC Shield with 12-cal visor mounts a 12 cal/cm² arc-rated face shield to the Resolve with a banded bracket. The bracket and replacement 12-cal shield are sold separately. Pair it with the Class E non-vented Resolve and confirm the arc rating covers your estimated incident energy.
Hearing Protection
Slot-mounted earmuffs rated at 23 dB attach directly to the Resolve FullBrim, so workers can flip hearing protection on and off without taking off the helmet.
Lighting
Hardknock's rechargeable headlamp and flashlight each put out 1,050 lumens, with magnetic mounts and chargers included. Mount them with the headlamp strap clips or flashlight rail clip.
Sun, Visibility, And Comfort
- Sun shield for extra shade on the FullBrim.
- Diamond Grade reflective sticker kit for visibility at night and in work zones.
- Replacement sweatbands, comfort pads, and rear suspension pads to keep a helmet comfortable and clean through its service life.
Which Resolve Should You Choose?
- Any chance of contact with electrical conductors? Choose a non-vented, Class E Resolve.
- Working on a USACE project? Use the Resolve USACE model and check your contract and site safety plan.
- Underground or using a cap lamp? The vented Resolve with mining bracket is built for it (Class C, so not for electrical work).
- Hot weather with no electrical hazard? The vented Resolve breathes better.
- Add accessories by task: arc shield for electrical work, visors for grinding and cutting, earmuffs for noise, and lights for night shifts.
Hardknock And The U.S. Army Corps Of Engineers
USACE districts have been moving crews to modern Type II safety helmets, and BDG Safety supplies Hardknock helmets to USACE teams and the subcontractors on their projects. Read more in how BDG Safety and Hardknock support mission-ready teams and USACE Savannah District implements modern safety helmets.
Caring For A Hardknock Helmet
- Inspect the shell, rails, suspension, and chin strap before each use.
- Replace sweatbands and pads when they wear out or will not come clean.
- Remove any helmet from service after a significant impact, even if no damage is visible.
- Follow Hardknock's guidance on service life and storage, and keep helmets out of hot vehicles and direct sun when not in use.
More detail in how to inspect a safety helmet and when to replace a safety helmet.
Hardknock Key Facts
Type II: every Resolve FullBrim is tested for top and side impact under ANSI/ISEA Z89.1.
Class C or E: vented models are Class C. Non-vented models are Class E.
4-point chin strap: included with every Resolve.
12 cal/cm²: the rating of Hardknock's ARC Shield face shield.
1,050 lumens: output of the Hardknock headlamp and flashlight.
Related Head Protection Resources
Comparing safety helmet brands. Hardknock vs. Studson, PIP, and Pyramex.
What is a Type II safety helmet? How side impact protection works.
Chin straps: when are they required? Keeping the helmet on.
Choosing the right safety helmet. A step-by-step buying guide.
Frequently Asked Questions About Hardknock Helmets
Q: Is the Hardknock Resolve a Type II helmet?
A: Yes. Every Resolve FullBrim model is an ANSI/ISEA Z89.1 Type II safety helmet, tested for impacts to the top and sides of the head.
Q: Which Hardknock helmet is Class E?
A: The non-vented Resolve FullBrim models, including the USACE version, are Class E. Vented models are Class C and should not be used near electrical hazards.
Q: Does the Hardknock Resolve come with a chin strap?
A: Yes. Each Resolve includes a 4-point chin strap. Replacements are available with a magnetic Fidlock buckle or a standard buckle.
Q: Can I put a face shield on a Hardknock helmet?
A: Yes. The rail-mounted visor bracket holds clear, tinted, and mesh visors, and the ARC Shield adds a 12 cal/cm² arc-rated face shield for electrical work.
Equip Your Crew With Hardknock
BDG Safety supplies Hardknock Resolve helmets and accessories to contractors, agencies, and USACE project teams, and can help you configure the right model for each crew. Call (619) 992-7621 or email info@bulldoggroup.net. BDG Safety is a Navy-veteran-founded, certified Service-Disabled Veteran-Owned Small Business (SDVOSB) that supplies Type II safety helmets and PPE to contractors, agencies, and the U.S. Army Corps of Engineers. Real people who know the gear, no phone menus. Open a B2B account or see how to buy.
Explore more guides in the BDG Safety Resource Center.